CPSC official recall · 07501

Scubapro® Recalls MK 20 Scuba Regulators for Service

召回日期：2006-10-02官方最后发布：2014-05-23适用地区：美国

重要：以下安全事实保留 CPSC 官方英文原文，避免翻译改变含义。请通过右侧官方公告确认行动要求。

危险说明 Hazard

Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.

受影响产品

Scubapro® MK 20 First Stage Regulators

Units：About 48,500 units

官方描述 Description

The recall involves first stage regulators that are marked with the Scubapro brand and identified as the MK20.

事故与伤害 Incidents / Injuries

No injuries or underwater incidents have been reported. Scubapro® USA has received eight reports of units that failed after being serviced.

官方补救措施 Remedy

Scubapro® USA has been providing a service upgrade kit via the authorized dealer network since May 2005 which contains a Yoke or Din retainer that prohibits over-tightening during annual service. Consumers can easily identify if the service upgrade has been completed by counting the vents on the plastic saddle located on the regulator. If the service upgrade has not been completed, the consumer should bring the regulator to any authorized Scubapro® dealer to have the service upgrade completed free of charge.

消费者联系信息

For assistance in locating the nearest authorized Scubapro® dealer or for more information, contact Scubapro® USA toll-free at (800) 731-6685 between 8 a.m. and 5 p.m. PT Monday through Friday, or go to the firm's Web site at www.scubapro-uwatec.com