CPSC official recall · 06185

Safety Alert: Robert Bosch Tool Corp. Masonry Drill Bits Lack Safety Warning Label

召回日期：2006-06-09官方最后发布：2024-06-25适用地区：美国

重要：以下安全事实保留 CPSC 官方英文原文，避免翻译改变含义。请通过右侧官方公告确认行动要求。

危险说明 Hazard

The drill bit packages are not properly labeled with precautionary information on proper use and operation. These and other manufacturers' 13-inch bits can bend when run at a high speed without being in contact with a work surface, resulting in loss of control of the drill and possible lacerations. The safety label should read: "! WARNING Read, understand and comply with tool manual before use. Wear eye protection. Max operating speed 600 RPM. At higher speeds the bit is likely to bend if allowed to rotate freely without contacting the work. Start drilling at low RPM and with bit tip in contact with work. To avoid bit bowing - Apply pressure only in direct line with bit and do not apply excessive pressure. Bits can bind, causing breakage or loss of control. Do not use in hammer drills or in drill press."

受影响产品

Vermont American® 13-inch-Long Masonry Drill Bits

Units：About 700,000

官方描述 Description

The drill bits are 1/4 inch by 13 inches long, 5/16 inch by 13 inches long, 3/8 inch by 13 inches long, and 1/2 inch by 13 inches long. They were sold separately as accessories under the "Vermont American" brand name under catalog numbers: 14044, 14045, 14046, and 14048.

事故与伤害 Incidents / Injuries

Robert Bosch Tool Corp. received one report of a minor injury.

官方补救措施 Remedy

Consumers should make sure that 13-inch masonry drill bits are in contact with a work surface at all times while operating the drill. Consumers with these drill bits that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.

消费者联系信息

Call Robert Bosch Tool Corp. at (800) 742-3869 between 7 a.m. and 7 p.m. CT Monday thru Friday.